Product Overview
This firmware update (Version 56.00.513C) is a critical intermediate update or reinstallation package for the Mazda Connect 1st Generation system. It is specifically used as a mandatory stepping stone for vehicles with very old software versions.
Important: This firmware is only for cars with the main menu layout shown in the photo (7-inch display with icons in a semi-circle).
Regional Compatibility
Region Code: ADR (Oceania, Asia, Middle East, Africa) Supported countries: Australia, New Zealand, Christmas Island, Fiji, Indonesia, Kangaroo Island, Malaysia, Middle East (Qatar, Saudi Arabia, etc.), Oceania, Papua New Guinea, Philippines, Singapore, South Africa/Africa, South America (Most countries), Asia (excluding Japan/China), Tasmania, Thailand.
Applicable Models
-
Mazda 3: 2012–2019
-
Mazda 2: 2012–2021*
-
Mazda 6: 2012–2021**
-
CX-3: 2014–2021
-
CX-5: 2012–2021**
-
CX-9: 2015–2021*
-
MX-5 Miata: 2014–2024*
Critical Compatibility Notes:
-
Not for System 2: Not compatible with 10.25-inch (26 cm) displays.
-
Not for TomTom: NOT for first-production CX-5 or Mazda 6 models equipped with TomTom Navigation units.
AIO Tweaks Compatibility (Special Note)
Ultimate Version for Customization: Version 56.00.513C is the final and most stable version that allows for the easy installation of Mazda AIO Tweaks via USB without requiring a serial connection. If you wish to maintain the ability to install custom scripts, video players, or touch-screen-while-driving patches, do not update beyond this version.
Upgrade Path – Read Carefully
If your current firmware is v30.00.000 or BELOW, you MUST install an earlier intermediate version (like v31.00.100A) FIRST before attempting to update to this version.
This is a TWO-FILE Installation:
-
First, install:
cmu150_ADR_56.00.513C_failsafe.up -
Then, install:
cmu150_ADR_56.00.513C_reinstall.up
Installation Requirements
-
USB Drive: 4GB to 16GB (Strictly FAT32 formatted). Do not use drives larger than 16GB.
-
Time: Approx. 30–50 minutes.
-
Power: Ensure a healthy vehicle battery or keep the engine running during installation.
Installation Instructions
Step 1: Preparation
-
Format your USB stick to FAT32.
-
Copy both .up files directly to the root directory (do not use folders).
-
Crucial: Disconnect all devices from USB ports and remove the Navigation SD card before starting.
Step 2: Enter Diagnostic Mode
-
Turn vehicle to ACC or ON mode.
-
Press and hold: Music Note + Favorites + Mute (Volume) for about 5 seconds.
Step 3: Update Process
-
Go to System Update > Search for Update.
-
The system will detect the files. Follow the sequence: Install Failsafe first, then Reinstall.
-
Warning: Do not power off the vehicle or remove the USB until the process is complete.
What’s Included
-
Firmware Files: Both Failsafe and Reinstall files for v56.00.513C.
-
Step-by-Step PDF Guide: A comprehensive manual is attached to the update files for your convenience.
Disclaimer: This update covers original Mazda systems only. We are not liable for malfunctions in aftermarket accessories or non-genuine components.
Reviews
There are no reviews yet.